Pioneer - 10-Inch Subwoofer - Pro Audio CM-510ST-W - White, Pair
Pioneer - 10-Inch Subwoofer - Pro Audio CM-510ST-W - White, Pair
Pioneer Pro Audio CM-510ST-W 10-Inch Subwoofer, White, Pair
Drawing on our club loudspeaker manufacturing heritage, the Kelton-configured CM-510ST subwoofer produce premium-quality audio. Available in black or white, these new units are perfect for discreet installation in a variety of spaces where reliability is crucial.
Rich, punchy bass with low distortion
Using the Kelton method*, the CM-510ST filters out unwanted mid and high-range frequencies and includes our newly developed Vortex Bass Accelerator technology to deliver pure, smooth bass with a quick response.
* The Kelton method extracts bass sound from a speaker by acoustically cutting out mid-to-high-range sounds. This is achieved by emitting the sound from a duct in a chassis sealed to the front and back of the unit.
Flexible 8 ohms impedance
An impedance of 8 ohms gives high and low impedance options. Deploy two subwoofers on one-amp channel, dropping the impedance to 4 ohms, and create a perfect solution for a single-amp installation.
Compact cabinet with floor and wall mounting options
Even though it produces a large, rich bass sound, the technology inside the CM-510ST is packed into a 50-litre box that saves space and fits discreetly into any location. Useful M8 holes make it easy to position the sub wherever you want. Fix it to the floor, wall or ceiling in the location that best suits the installation and sound coverage.
Technical Specifications
Loudspeaker Type
Kelton method subwoofer
Rigging and Hardware
20 × M8 threaded mounting points on side
Enclosure
Black: Wood w/Polyuretane paint
White: Wood w/water-based paint
Frequency response (- 10 dB, Typical)
45 Hz - 150 Hz
Sensitivity (1W/1m)
95 dB (half space)
Nominal Impedance
8 OHM
Power Handling (RMS/Program)
200 W / 400 W
* IEC60268-5
Transformer taps
70 V: 200 W / 100 W / 50 W / 25 W
100 V: 200 W / 100 W / 50 W
Maximum SPL
124 dB (peak, half space)
* Calculated from the power handling and sensitivity
Driver Configuration
10" (250 mm) cone
Connectors
Euroblock (4 pin) × 1 (input: +/-, loop-thru: +/-)
Dimensions ( W x H x D)
260.0 x 500.0 x 400.0 mm
(10.23" x 19.69" x 15.75")
Weight / piece
17.9 kg
39.5 lbs.
Color
CM-510ST-K: Black, CM-510ST-W: White
#Pioneer #proaudio #CM-510ST-K #10inch #subwoofer #proavtechstore #av #white #pair
Pioneer Pro Audio CM-510ST-W 10-Inch Subwoofer, White, Pair
Drawing on our club loudspeaker manufacturing heritage, the Kelton-configured CM-510ST subwoofer produce premium-quality audio. Available in black or white, these new units are perfect for discreet installation in a variety of spaces where reliability is crucial.
Rich, punchy bass with low distortion
Using the Kelton method*, the CM-510ST filters out unwanted mid and high-range frequencies and includes our newly developed Vortex Bass Accelerator technology to deliver pure, smooth bass with a quick response.
* The Kelton method extracts bass sound from a speaker by acoustically cutting out mid-to-high-range sounds. This is achieved by emitting the sound from a duct in a chassis sealed to the front and back of the unit.
Flexible 8 ohms impedance
An impedance of 8 ohms gives high and low impedance options. Deploy two subwoofers on one-amp channel, dropping the impedance to 4 ohms, and create a perfect solution for a single-amp installation.
Compact cabinet with floor and wall mounting options
Even though it produces a large, rich bass sound, the technology inside the CM-510ST is packed into a 50-litre box that saves space and fits discreetly into any location. Useful M8 holes make it easy to position the sub wherever you want. Fix it to the floor, wall or ceiling in the location that best suits the installation and sound coverage.
Technical Specifications
Loudspeaker Type
Kelton method subwoofer
Rigging and Hardware
20 × M8 threaded mounting points on side
Enclosure
Black: Wood w/Polyuretane paint
White: Wood w/water-based paint
Frequency response (- 10 dB, Typical)
45 Hz - 150 Hz
Sensitivity (1W/1m)
95 dB (half space)
Nominal Impedance
8 OHM
Power Handling (RMS/Program)
200 W / 400 W
* IEC60268-5
Transformer taps
70 V: 200 W / 100 W / 50 W / 25 W
100 V: 200 W / 100 W / 50 W
Maximum SPL
124 dB (peak, half space)
* Calculated from the power handling and sensitivity
Driver Configuration
10" (250 mm) cone
Connectors
Euroblock (4 pin) × 1 (input: +/-, loop-thru: +/-)
Dimensions ( W x H x D)
260.0 x 500.0 x 400.0 mm
(10.23" x 19.69" x 15.75")
Weight / piece
17.9 kg
39.5 lbs.
Color
CM-510ST-K: Black, CM-510ST-W: White
#Pioneer #proaudio #CM-510ST-K #10inch #subwoofer #proavtechstore #av #white #pair